Select Page

ZAP Foam Safe Odourless CA Medium Viscosity 20g PT-25x No kicker required!

$29.00

Lots of Zap adhesives in stock.

10 in stock

Description

NEW RELEASE FROM zap. No kicker required with these new PT25x bottles.

ZAP Foam Safe Odourless CA Medium Viscosity 20g

  • ODORLESS FORMULA
  • MEDIUM GAP FILLING VISCOSITY
  • WORKS ON STYROFOAM AND FOAM WITHOUT PRIMER
  • WORKS ON BALSA, PLYWOOD & OTHER MATERIALS AS WELL
  • Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. 
    Works best on:
    • Carbon Fiber
    • Cell Foam
    • Ceramics
    • EPS Foam
    • Foam Board
    • Polystyrene
    • XPS Foam
    • Wood

    : No Accelerator Needed – Zap-O Xtra does not need accelerator to cure. However, if you would like to speed things up, Zap-O Foam Safe Accelerator can be used. Non-Fuming – If you are sensitive to the fumes that come from a traditional CA, you will love the new ZAP-O Xtra. Resists Moisture – This CA is great for foam boats, and planes with floats. Vibration Resistance – This formulation adds additional vibration resistance without adding a rubber into your glue. Overview: This CA (Cyanoacrylate) glue from Zap Adhesives is shockproof, foam safe, odorless and it does not need an accelerator. Use Zap-O Xtra just like you would any other CA glue. Simply add a little to one surface and mate it to the other. Hold the junction together for 30 seconds and you are done. Not just for Foam. If you like building with wood, composites, plywood or spruce, Zap-O Xtra is a great option. Zap-O Xtra will bond woods from the soft balsa wood to hard oak. With a viscosity between Zap-CA and Zap-A-Gap, modelers will find that this is a great glue for many applications. If you are working in a dry environment or using materials that are extra dry like some open cell foams, simply add a little moisture to one side of the foam before paring them together. Some of the foams are extra dry and adding a slight bit of moisture from a spritzer or damp rag will allow the glue to grab even stronger without the need of an accelerator.

     

     

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…