Description
1 Lost Model Alarm.
Simply turn off the transmitter and after 1 minute the alarm will scream to help you locate a lost model.
Instructions for use.
Connect the alarm between the servo and the receiver, i.e. act as a servo extension cord.
Turn on your TX. and you will hear 2 x beep sounds.
Do not move any of the control sticks, simply turn off the TX. You will hear a continuous been sound after 1 minute. It will stop once u turn on your TX or move the control stick.
If you ignore the continuous beep sound for around 2minutes, the beep sound will change to a louder sound.
You need to disconnect the alarm from the receiver in order to switch off the alarm.
MAKE SURE THE CORRECT POLARITY BEFORE TURN ON THE TX
Reviews
There are no reviews yet.