Description
Designed to provide reliable and clean power for 3D park flyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Spec.
Battery: 2~3 Cell /7.4~11.1V
Battery: 2~3 Cell /7.4~11.1V
RPM: 890kv
Max current: 14A
No load current: 8V/0.7A
Current capacity: 18A/15sec
Internal resistance: 0.20 ohm
Weight: 67g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 51x28mm
Weight: 67g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 51x28mm
Required;
20A ESC
2S~3S Li-Po / 6 ~ 10-cell Ni-MH/Ni-Cd
9×6 ~ 11×3.8 prop
Suitable for sport and scale airplanes weighing 15 to 30 ounces (425g–850g).
2S~3S Li-Po / 6 ~ 10-cell Ni-MH/Ni-Cd
9×6 ~ 11×3.8 prop
Suitable for sport and scale airplanes weighing 15 to 30 ounces (425g–850g).
-
Kv(rpm/v)890.00
-
Max Current (Motor) (A)14.00
-
Resistance (mh)0.00
-
Max Voltage (V)11.00
-
Power (W)150.00
-
Shaft A(mm)4.00
-
Length B (mm)38.00
-
Can Diameter C(mm)28.00
-
Can Length D(mm)19.00
-
Total Length E(mm)51.00
Found this info in a Hobby King review.
here is the prop test data on 3s
Prop Amps thrust-gr
9×6-9A-698 gr
10×6-11.50A-832gr
11×6-14A-952gr
11×3.8-11A-721gr
Prop test data 2s
10×6-6.25A-427gr
11×6-7.80A-502gr
12×6-9.35A-570gr
13×8-12.27A-733gr
Reviews
There are no reviews yet.